SOUTHBRIDGE (WITH HEATSINK)

This article is about components used to cool semiconductors. For other uses, see Heat sink (disambiguation).
A fan-cooled heat sink on the processor of a personal computer. To the right is a smaller heat sink cooling another integrated circuit of the motherboard.
In electronic systems, a heat sink is a passive heat exchanger component that cools a device by dissipating heat into the surrounding air. In computers, heat sinks are used to cool central processing units or graphics processors. Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronic devices such as lasers and light emitting diodes (LEDs), wherever the heat dissipation ability of the basic device package is insufficient to control its temperature.
A heat sink is designed to increase the surface area in contact with the cooling medium surrounding it, such as the air. Approach air velocity, choice of material, fin (or other protrusion) design and surface treatment are some of the factors which affect the thermal performance of a heat sink. Heat sink attachment methods and thermal interface materials also affect the eventual die temperature of the integrated circuit. Thermal adhesive or thermal grease fills the air gap between the heat sink and device to improve its thermal performance. Theoretical, experimental and numerical methods can be used to determine a heat sink's thermal performance.

CMOS BACKUP BATTERY

A backup battery provides power to a system when the primary source of power is unavailable. Backup batteries range from small single cells to retain clock time and date in computers, up to large battery room facilities that power uninterruptible power supply systems for large data centers. Small backup batteries may be primary cells; rechargeable backup batteries are kept charged by the prime power supply.

GRAPHICS PROCESSOR

A graphics processing unit (GPU), also occasionally called visual processing unit (VPU), is a specialized electronic circuit designed to rapidly manipulate and alter memory to accelerate the building of images in a frame buffer intended for output to a display. GPUs are used in embedded systems, mobile phones, personal computers, workstations, and game consoles. Modern GPUs are very efficient at manipulating computer graphics, and their highly parallel structure makes them more effective than general-purpose CPUs for algorithms where processing of large blocks of data is done in parallel. In a personal computer, a GPU can be present on a video card, or it can be on the motherboard or—in certain CPUs—on the CPU die.[1]
The term GPU was popularized by Nvidia in 1999, who marketed the GeForce 256 as "the world's first 'GPU', or Graphics Processing Unit, a single-chip processor with integrated transform, lighting, triangle setup/clipping, and rendering engines that are capable of processing a minimum of 10 million polygons per second". Rival ATI Technologies coined the term visual processing unit or VPU with the release of the Radeon 9700 in 2002.

PCI SLOT

Conventional PCI (PCI is an initialism formed from Peripheral Component Interconnect,[1] part of the PCI Local Bus standard and often shortened to PCI) is a local computer bus for attaching hardware devices in a computer. The PCI bus supports the functions found on a processor bus, but in a standardized format that is independent of any particular processor. Devices connected to the bus appear to the processor to be connected directly to the processor bus, and are assigned addresses in the processor's address space.[2]
Attached devices can take either the form of an integrated circuit fitted onto the motherboard itself, called a planar device in the PCI specification, or an expansion card that fits into a slot. The PCI Local Bus was first implemented in IBM PC compatibles, where it displaced the combination of ISA plus one VESA Local Bus as the bus configuration. It has subsequently been adopted for other computer types. PCI and PCI-X are being replaced by PCI Express,[citation needed] but as of 2011, most motherboards are still made with one or more PCI slots, which are sufficient for many uses.
The PCI specification covers the physical size of the bus (including the size and spacing of the circuit board edge electrical contacts), electrical characteristics, bus timing, and protocols. The specification can be purchased from the PCI Special Interest Group (PCI-SIG).
Typical PCI cards used in PCs include: network cards, sound cards, modems, extra ports such as USB or serial, TV tuner cards and disk controllers. PCI video cards replaced ISA and VESA cards, until growing bandwidth requirements outgrew the capabilities of PCI; the preferred interface for video cards became AGP, and then PCI Express. PCI video cards remain available for use with old PCs without AGP or PCI Express slots.[3]
Many devices previously provided on PCI expansion cards are now commonly integrated onto motherboards or available in universal serial bus and PCI Express versions.

GIGABIT ETHERNET CHIP

In computer networking, gigabit Ethernet (GbE or 1 GigE) is a term describing various technologies for transmitting Ethernet frames at a rate of a gigabit per second (1,000,000,000 bits per second), as defined by the IEEE 802.3-2008 standard. It came into use beginning in 1999, gradually supplanting Fast Ethernet in wired local networks, where it performed considerably faster. The cables and equipment are very similar to previous standards and were very common and economical by 2010.
Half-duplex gigabit links connected through hubs are allowed by the specification,[1] but full-duplex usage with switches is much more common.

PCI EXPRESS

PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe, is a high-speed serial computer expansion bus standard designed to replace the older PCI, PCI-X, and AGP bus standards. PCIe has numerous improvements over the aforementioned bus standards, including higher maximum system bus throughput, lower I/O pin count and smaller physical footprint, better performance-scaling for bus devices, a more detailed error detection and reporting mechanism (Advanced Error Reporting (AER) [1]), and native hot-plug functionality. More recent revisions of the PCIe standard support hardware I/O virtualization.
The PCIe electrical interface is also used in a variety of other standards, most notably ExpressCard, a laptop expansion card interface.
Format specifications are maintained and developed by the PCI-SIG (PCI Special Interest Group), a group of more than 900 companies that also maintain the conventional PCI specifications. PCIe 3.0 is the latest standard for expansion cards that is in production and available on mainstream personal computers.

CPU SOCKET

A CPU socket or CPU slot is a mechanical component that provides mechanical and electrical connections between a microprocessor and a printed circuit board (PCB). This allows the CPU to be replaced without soldering.
Common sockets have retention clips that apply a constant force, which must be overcome when a device is inserted. For chips with a large number of pins, either zero insertion force (ZIF) sockets or land grid array (LGA) sockets are used instead. These designs apply a compression force once either a handle (for ZIF type) or a surface plate (LGA type) is put into place. This provides superior mechanical retention while avoiding the risk of bending pins when inserting the chip into the socket.
CPU sockets are used in desktop and server computers. As they allow easy swapping of components, they are also used for prototyping new circuits. Laptops typically use surface mount CPUs, which need less space than a socketed part.

CPU FAN CONNECTOR

A computer fan is any fan inside, or attached to, a computer case used for active cooling, and may refer to fans that draw cooler air into the case from the outside, expel warm air from inside, or move air across a heatsink to cool a particular component.

DIMM MEMORY SLOTS

A DIMM or dual in-line memory module, comprises a series of dynamic random-access memory integrated circuits. These modules are mounted on a printed circuit board and designed for use in personal computers, workstations and servers. DIMMs began to replace SIMMs (single in-line memory modules) as the predominant type of memory module as Intel P5-based Pentium processors began to gain market share.
The main difference between SIMMs and DIMMs is that DIMMs have separate electrical contacts on each side of the module, while the contacts on SIMMs on both sides are redundant. Another difference is that standard SIMMs have a 32-bit data path, while standard DIMMs have a 64-bit data path. Since Intel's Pentium has (as do several other processors) a 64-bit bus width, it requires SIMMs installed in matched pairs in order to complete the data bus. The processor would then access the two SIMMs simultaneously. DIMMs were introduced to eliminate this practice.
The most common types of DIMMs are:
72-pin SO-DIMM (not the same as a 72-pin SIMM), used for FPM DRAM and EDO DRAM
100-pin DIMM, used for printer SDRAM
144-pin SO-DIMM, used for SDR SDRAM
168-pin DIMM, used for SDR SDRAM (less frequently for FPM/EDO DRAM in workstations/servers)
172-pin MicroDIMM, used for DDR SDRAM
184-pin DIMM, used for DDR SDRAM
200-pin SO-DIMM, used for DDR SDRAM and DDR2 SDRAM
204-pin SO-DIMM, used for DDR3 SDRAM
214-pin MicroDIMM, used for DDR2 SDRAM
240-pin DIMM, used for DDR2 SDRAM, DDR3 SDRAM and FB-DIMM DRAM
244-pin MiniDIMM, used for DDR2 SDRAM

SUPER I/O CHIP

Super I/O is a class of I/O controller integrated circuits that began to be used on personal computer motherboards in the late 1980s, originally as add-in cards, later embedded on the motherboards. A super I/O chip combines interfaces for a variety of low-bandwidth devices. The functions provided usually include:
A floppy disk controller
A parallel port (commonly used for printers)
One or more serial ports
A PS/2 keyboard and mouse interface.
Temperature sensor and fanspeed monitoring
A super I/O chip may also have other interfaces, such as a game port or an infrared port. By combining many functions in a single chip, the number of parts needed on a motherboard is reduced, thus reducing the cost of production.
Some chips have support to detect if the case gets opened (chassis intrusion).
The original super I/O chips communicated with the central processing unit via a connection with an Industry Standard Architecture (ISA) bus. With the evolution away from ISA towards use of the Peripheral Component Interconnect (PCI) bus, the Super I/O chip was often the biggest remaining reason for continuing inclusion of ISA on the motherboard.
Modern super I/O chips use the Low Pin Count (LPC) bus instead of ISA for communication with the Central processing unit. This normally occurs through an LPC interface on the southbridge chip of the motherboard.
Companies that make super I/O controllers include Nuvoton, ITE, Fintek, and SMSC. Nuvoton is the former logic business group of Winbond Electronics Corporation. National Semiconductor used to make them but sold that business to Winbond in 2005.

ATX POWER CONNECTOR

ATX (Advanced Technology eXtended) is a motherboard form factor specification developed by Intel in 1995 to improve on previous de facto standards like the AT form factor. It was the first major change in desktop computer enclosure, motherboard, and power supply design in many years, improving standardization and interchangeability of parts. The specification defines the key mechanical dimensions, mounting point, I/O panel, power and connector interfaces between a computer case, a motherboard, and a power supply. With the improvements it offered, including lower costs, ATX overtook AT completely as the default form factor for new systems within a few years. ATX addressed many of the AT form factors annoyances that had frustrated system builders. Other standards for smaller boards (including microATX, FlexATX and mini-ITX) usually keep the basic rear layout but reduce the size of the board and the number of expansion slots. In 2003, Intel announced the BTX standard, intended as a replacement for ATX. As of 2009, the ATX form factor remains a standard for do-it-yourselfers; BTX has however made inroads into pre-made systems. This[clarification needed] was designed to solve the problems in BAT and LPX motherboards.[citation needed]
The official specifications were released by Intel in 1995, and have been revised numerous times since, the most recent being version 2.3,[1] released in 2007.

FLOPPY DRIVE CONNECTOR

A floppy disk, or diskette, is a disk storage medium composed of a disk of thin and flexible magnetic storage medium, sealed in a rectangular plastic carrier lined with fabric that removes dust particles. They are read and written by a floppy disk drive (FDD).
Floppy disks, initially as 8-inch (200 mm) media and later in 5.25-inch (133 mm) and 3.5-inch (90 mm) sizes, were a ubiquitous form of data storage and exchange from the mid-1970s well into the first decade of the 21st century.[1]
By 2010, computer motherboards were rarely manufactured with floppy drive support; 3 1⁄2" floppies could be used as an external USB drive, but 5 1⁄4", 8", and non-standard drives could only be handled by old equipment.
While floppy disk drives still have some limited uses, especially with legacy industrial computer equipment, they have been superseded by data storage methods with much greater capacity, such as USB flash drives, portable external hard disk drives, optical discs, memory cards, and computer networks.

SATA CONNECTOR

Serial ATA (SATA) is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. Serial ATA was designed to replace the older AT Attachment standard (ATA; later referred to as Parallel ATA or PATA), offering several advantages over the older interface: reduced cable size and cost (seven conductors instead of 40), native hot swapping, faster data transfer through higher signalling rates, and more efficient transfer through an (optional) I/O queuing protocol.

SATA host adapters and devices communicate via a high-speed serial cable over two pairs of conductors. In contrast, parallel ATA (the redesignation for the legacy ATA specifications) used a 16-bit wide data bus with many additional support and control signals, all operating at much lower frequency. To ensure backward compatibility with legacy ATA software and applications, SATA uses the same basic ATA and ATAPI command-set as legacy ATA devices.

SATA has replaced parallel ATA in consumer desktop and laptop computers, and has largely replaced PATA in new embedded applications. SATA's market share in the desktop PC market was 99% in 2008.[2] PATA remains widely used in industrial and embedded applications that use CompactFlash storage, even though the new CFast standard is based on SATA.[3][4]

Serial ATA industry compatibility specifications originate from The Serial ATA International Organization (aka. SATA-IO, serialata.org). The SATA-IO group collaboratively creates, reviews, ratifies, and publishes the interoperability specifications, the test cases, and plug-fests. As with many other industry compatibility standards, the SATA content ownership is transferred to other industry bodies: primarily the INCITS T13 subcommittee ATA, the INCITS T10 subcommittee (SCSI); a subgroup of T10 responsible for Serial Attached SCSI (SAS). The complete specification from SATA-IO.[5] The remainder of this article will try to use the terminology and specifications of SATA-IO.

Motherboard

In electronics and in particular computer hardware, a motherboard (sometimes alternatively known as the mainboard, system board, planar boardor logic board,^[1] or colloquially, a mobo) is the main printed circuit board (PCB) found in computers and other expandable systems. It holds many of the crucial electronic components of the system, such as the central processing unit (CPU) and memory, and provides connectors for other peripherals. Unlike a backplane, a motherboard contains significant sub-systems such as the CPU.

Motherboard specifically refers to a PCB with expansion capability - the board is the "mother" of all components attached to it, which often includesound cards, video cards, network cards, hard drives or other forms of persistent storage, TV tuner cards, cards providing extra USB or Firewire slots, and a variety of other custom components. (The term mainboard is applied to devices with a single board and no additional expansions or capability - in modern terms this would include controlling boards in televisions, washing machines and other embedded systems, which are not true motherboards.)